LED灯具做EMC测试包括两个方面的要求:一方面是指LED灯在正常运行过程中对所在环境产生的电磁干扰不能超过一定的限值;另一方面是指LED器具对所在环境中存在的电磁干扰具有一定程度的抗扰度,即电磁敏感性。那么,LED灯具EMC测试具体有哪些标准和项目。
LED灯具EMC测试标准以及要求:
国际标准号 |
标准名称 |
IEC61547-2000 |
Equipment for general lighting purposes - EMC immunity requirements 一般照明用设备电磁兼容抗扰度要求 |
IEC60064-2002 |
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements 家用及类似场合照明用钨丝灯 性能要求 |
IEC60081-2000 |
Double-capped fluorescent lamps - Performance specifications 双端荧光灯 性能要求 |
IEC60155-1995 |
Glow-starters for fluorescent lamps 荧光灯用辉光启动器 |
IEC60188-2001 |
High-pressure mercury vapour lamps - Performance specifications 高压汞灯 性能要求 |
IEC60192-2001 |
Low-pressure sodium vapour lamps - Performance specifications 低压钠灯 性能要求 |
IEC60357-2002 |
Tungsten halogen lamps (non vehicle) - Performance specifications 非机动车用卤钨灯 性能要求 |
IEC60360-1998 |
Standard method of measurement of lamp cap temperature rise 灯头温升的标准测量方法 |
IEC60432-1-1999 |
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes 白炽灯安全要求 第1部分:家用及类似场合照明用钨丝灯 |
IEC60432-2-1999 |
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes 白炽灯安全要求 第2部分:家用及类似场合照明用卤钨灯 |
IEC60432-3-2002 |
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) 白炽灯安全要求 第3部分:卤钨灯(非机动车辆用) |
IEC60434-1984 |
Aircraft electrical filament lamps 航空器照明用钨丝灯 |
IEC60630-2002 |
Maximum lamp outlines for incandescent lamps 白炽灯的最大外形尺寸 |
IEC60634-1993 |
Heat test source (H.T.S.) lamps for carrying out heating tests on lu minaires 灯具热试验用热试验源灯 |
IEC60662-2002 |
High-pressure sodium vapour lamps 高压钠灯 |
IEC60682-1997 |
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps 石英卤钨灯夹封部位温度的标准测量方法 |
IEC60809-2004 |
Lamps for road vehicles - Dimensional, electrical and luminous requirements 机动车辆照明用钨丝灯 尺寸及光电要求 |
IEC60810-2003 |
Lamps for road vehicles - Performance requirements 机动车辆照明用灯泡 性能要求 |
IEC60882-1986 |
Pre-heat requirements for starterless tubular fluorescent lamps 管形荧光灯(无启动器)预热要求 |
IEC60887-2003 |
Glass bulb designation system for lamps 灯用玻壳命名系统 |
IEC60901-2004 |
Single-capped fluorescent lamps - Performance specifications 单端荧光灯 性能要求 |
LED灯具做EMC测试的项目标准和要求正如上文所述,想了解更多关于LED灯具办理检测认证的知识请关注深圳天海检测。天海检测拥有独立的EMC实验室和EMC测试工程师,做LED灯具的EMC测试认准天海检测。
【本文标签】 EMC、EMC测试、
【责任编辑】